cn2主机向导TECHNICAL DATA SHEET
| Cable | WinG-AristonC PRC WB LV VS FO 0,6/1kV | |
| Nr. and section of cores | N°xmm2 | 3、120+2G70/2+12E9/125 |
| Cable construction | ||
| Phase conductor | ||
| Nominal cross section | mm2 | 120 |
| Conductor material | Tinned copper | |
| Conductor construction | Class 5 acc. to VDE 0295, IEC 60228 | |
| Indicative diameter | mm | 14,5 |
| Insulation | ||
| Insulation material – | 3GI3 rubber compound, acc. to VDE 0207 part 20 | |
| Earth conductor | ||
| Nominal cross section | mm2 | 35 |
| Conductor material | Tinned copper | |
| Conductor construction | Class 5 acc. to VDE 0295, IEC 60228 | |
| Covering | 3GI3 rubber compound, acc. to VDE 0207 part 20 | |
| Fibre-optics | ||
| Fibre | Trasmission data 9/125 | |
| Number of fibres | 12 | |
| Core arrangement | Fibres twisted with central textile support | |
| Fibres arrangement covering | Special compound over the twisted cores | |
| Cradle filler | ||
| Cradle filler material – | Semiconductive compound on tinned copper support | |
| Inner sheath | ||
| Material – | Special rubber compound, 5GM5 quality acc. to VDE 0207 part 21 | |
| Antitorsional element | ||
| Material – | Textile fiber | |
| Outer sheath | ||
| Material | Special rubber compound, 5GM5 quality acc. to VDE 0207 part 21 | |
| Nominal outer diameter | mm | 56,5 (max 59,7) |
| Approx weight | kg/km | 6540 |
| Colour | Yellow | |
| i Electrical working data 1 | ||
| Nominal rated voltage Uo / U | kV | 0,6/1 |
| Test voltage | kV | 4 |
| Maximum electrical resistance at 20°C | Q/km | 0,164 |
| Maximum electrical resistance at 90°C | Q/km | 0,209 |
| Maximum phase reactance at 50 Hz | Q/km | 0,074 |
| Thermal working data | ||
| Maximum short circuit temperature | °C | 250 |
| Maximum working temperature on the conductor | °C | 90 |
| Minimum ambient temperature: mobile condition | °C | -30 |
| Minimum ambient temperature: static condition | °C | -50 |
| Mechanical and chemical working data | ||
| Min. bending radius (freely flexing acc.to VDE 0298 part 3) | mm | 285 |
| Max tensile load | N | 10800 |
| Oil resistance | Acc. to IEC 60811-404 | |
| Ozone resistance | Acc. to IEC 60811-403 | |
| Burning behaviour | Acc. to IEC 60332-1-2 | |
| NOTE
Standard reference: Based on DIN VDE 0250 Part 814 |
||
ARISTONCAVI
Research & Development Dept.
| Compiled by: E. Muffato | date | 02/07/2021 |
| Approved by: M. Pirana | A010744 | N° 12427 – rev.03 |
